language
English
العربية
বাংলাদেশ
Български
Hrvatski
Česky
Dansk
Nederland

Slovenski
Filipino
Suomi
Français
Maori

Georgian

Deutsch
Ελλάδα
ישראל
इंडिया
Magyarország
Ísland
Indonesia
Irlanda
Italia
日本語
Sovensko
Հայաստան
한국
Kyrgyz
ປະເທດລາວ

Latvian
Lithuanian
Luxembourgish

Macedonian
Малайская
Maltese
Монгол улс

ဗမာ

नेपाल
Norge
ایران
Polska
Portugal
România
Российская
Србија

Србија

Bosanski
Slovenian
Беларус
España
Sverige
Точик
ประเทศไทย
Türk
Azərbaycan
Uzbek

Việt Nam
APPLICATION

Primary system
- For all major DC fan coil brands on the market
- For heat pump system, simultaneous control of AC/DC fan coil and floor heating
- DC fan with 0~10V automatic speed control and 5-speed manual speed control
- Dry contact & Modbus 485, remote & voice control, APP timing & scene setting, temperature & humidity display
- Zone control: according to the nature of the use of different rooms and user habits to set different temperatures to achieve independent constant temperature and humidity control with a single room unit
- The air conditioning and floor heating line is the same as the traditional temperature control panel, which can be directly used for new installation & upgrading of old systems

Radiant floor system
- For heat pump system, simultaneous control of AC/DC fan coils & ground radiation
- Dry contact & Modbus 485, remote & voice control, APP timing & scene set control, temperature & humidity display
- Two cooling modes (floor cooling + fan coil, fan coil); three heating modes (floor heating, floor heating + fan coil, fan coil)
- Built-in temperature & humidity sensor and external sensor (NTC)
- Zone control: according to the nature of different room use and user habits, different temperatures are set to achieve independent constant temperature and humidity control with a single room as a unit
- Air conditioning and floor heating lines are consistent with traditional temperature control panels, can be used directly for new installations & upgrades of old systems

Floor cooling system
- For heat pump system, simultaneous control of top & ground radiation
- Dry contact & Modbus 485, remote & voice control, APP timing & scene set control, temperature and humidity display
- Three cooling modes (top cooling, floor cooling + top cooling, floor cooling) Three heating modes (floor heating, floor heating & fan coil, fan coil)
- Built-in temperature & humidity sensor and external sensor (NTC) panel with anti-condensation function
- Zone control: according to the nature of the use of different rooms and user habits to set different temperatures to achieve independent constant temperature and humidity control with a single room as a unit

Heating system
- For heat-fired boilers, wall-mounted stoves & heat pump heating systems
- Temperature control panel with external temperature sensor, can be used as water temperature detection & temperature setting panel, both timing control & temperature control
- Temperature control panel with built-in temperature and humidity sensor, can be used as single heating thermosta
- Both local linkage and remote control functions, can be set through the APP timing, scene applications and other functions
- Zone control: according to the nature of different room use and user habits, set different temperatures to achieve a single room as a unit, each room to achieve independent constant temperature

Secondary pump system
- For heat pump system, simultaneous control of AC/DC fan coil and floor heating
- DC fan with 0~10V automatic speed control and 5-speed manual speed control
- Suitable for all mainstream DC fan brands on the market
- Wired dry contact & Modbus 485, remote & voice control, APP timing & scene setting, temperature & humidity display
- Water module linkage via indoor panel dry contact or 485 line, three sets of probes for temperature sensing, secondary pump linkage switch & host mode
- Zone control: according to the nature of different room use and user habits to set different temperatures to a single room as a unit, to achieve independent constant temperature and humidity control
- Air conditioning and floor heating line with the traditional temperature control panel, can be directly used for new installation & upgrade of the old system

Hot water circulation system
- Suitable for hot water circulation pump control
- App timer to run the hot water cycle before the daily water peak time, ensuring that the water is instantly hot when it is used
- Hot water temperature control & time control
- The hot water circulation pump runs intermittently during the cycle and supports customised pump start and stop times
- External NTC for constant temperature circulation of the hot water tank within a set time

Heat pump+Water system
- Centralised control of heat pump systems and hot water circulation pumps
- Wired linkage of secondary systems
- Storage tank temperature control with Modbus 485 for water temperature linkage
- App timer to run the hot water cycle before the daily water peak hours to ensure instantaneous heating when water is used
- The hot water circulation pump runs intermittently during the cycle and supports customised pump start and stop times
- External NTC for constant temperature circulation of the hot water tank during the set time

Auxiliary heating (climate compensation)
- For heat pump auxiliary heating systems, with simultaneous control of fan coil and floor heating
- When the heating load is too high in cold climates, the wall-hung stove can be used as an auxiliary heat source to meet the heating demand of the system
- Local linkage, one-touch central control and remote control, with timer and scene setting via APP
- Zone control: according to the nature of the use of different rooms and user habits, set different temperatures to individual rooms as a unit, each room to achieve independent thermostat
- One-touch switching of winter and summer modes at the end, from 485 mode to dry contact linkage for host-side mode switching

Two heat pump system
- Simultaneous control of two heat pumps, load balancing control, save energy and extend the life of heat pump
- Local linkage, one-key central control and remote control functions, timing and scenes can be set via APP
- Zone control: according to the nature of different rooms and user habits, different temperatures can be set and each room can be used as a unit to achieve independent constant temperature
Primary system
Radiant floor system
Floor cooling system
Heating system
Secondary pump system
Hot water circulation system
Heat pump+Water system
Auxiliary heating(climate compensation)
Two heat pump system