language

Slovenski

Filipino

MEDIA

Home page

2024

Heat pump water heaters installation guide

author:

Heat pump water heaters (HPWHs) are becoming a preferred choice for energy-efficient hot water solutions in residential and commercial settings. Their ability to extract heat from the environment and convert it into hot water makes them an eco-friendly option. The following are the general steps and methods for its installation:

Heat pump water heaters

First, choose a suitable installation location. This location needs to be well ventilated to ensure that the heat pump can dissipate heat normally, and it should be easy to connect the water pipes and power supply. The heat pump should be installed on a flat, stable surface. Options include concrete floors or steel frames with rubber feet, which can be used for installations on rooftops or elevated surfaces. Ensure the location is easily reachable for routine maintenance and service. This accessibility will save time and effort during future inspections or repairs.

Before installation, carefully check whether the water, electricity, and other infrastructure of the house meet the requirements to ensure that the required water and electricity resources can be stably provided.

Then, start installing the host. Use suitable fixings, such as expansion screws, to firmly install the host in the selected location to ensure that it runs stably without shaking or making noise.

Then connect the water pipes to ensure that the water pipes are tightly connected and there is no water leakage. Use pipe fittings and sealants as necessary to create secure joints. The water inlet and outlet should be installed correctly to ensure the normal supply and discharge of hot water. Inspect the connections at the indoor unit, ensuring that all pipe connections are correct and that any necessary valves are opened.

For the installation of the electrical part, be sure to strictly follow the electrical specifications to ensure that the line connection is correct and safe. Verify that the power supply voltage is stable, and confirm that all screws are tightly fastened. Ensure that wiring aligns with the provided diagrams, and that proper grounding is established.

After the installation is completed, a comprehensive inspection and test should be carried out. Check whether each component is firmly installed, whether it is running normally, and whether the water temperature meets the set requirements.

During the entire installation process, be sure to follow the requirements of the installation instructions and seek help and guidance from professionals to ensure the correctness and safety of the installation.

In short, correct installation is an important prerequisite for the efficient and stable operation of heat pump water heaters, and every installation step needs to be taken seriously.

Reasons for the high noise of air to water heat pump

Working principle of air to water inverter heat pump